Ứng dụng > Ứng dụng bãi đỗ xe

Car parks

Surfaces used for vehicle traffic have special requirements to protect them from deterioration over time due to their subjection to intense use. Constant turning, acceleration and braking will test the endurance and surface adhesion of materials used in the construction of cark parks, garages, vehicle dealerships and aircraft hangars etc..
 
In such cases, the best option is to apply a coat of 100% pure NEWTEC PUA (EPL-550) waterproofing system is ideal.
 
With proven results of tensile strength (15-20MPa), surface adhesion ASTM D4541 (≥ 1.5Mpa), abrasion resistance Tabel; C-17, 1000 round, 1kg (≤ 30mg) and elongation ASTM 412C (≥ 450%).
 
Additionally, the NEWTEC PUA (EPL-550) dries in just 19-20 seconds, allowing practical application in areas with unstable weather and frequent rain.
1.Flooring systems for vehicle traffic WITH waterproofing
1.SURFACE PREPARATION

Vehicle parking flooring systems can be applied on a wide range of existing surfaces (mortar, cement, traditional waterproof sheeting, ceramics, wood etc), using a few simple steps.

2.PRIMER

First apply a coat of primer resin to ensure maximum adhesion to the surface.

3.WATERPROFING MEMBRANE

NEWTEC PUA waterproof coating – Polyurea based material will be applied directly on the lining.

4.FINISH LAYER
Finish coat EPOXY POLY GUARD – HBSFLE-FG-8248 is a high performance coating.
 
High abrasion resistance, UV resistance and color fastness
2.Flooring systems for vehicle traffic WITHOUT waterproofing
1.SURFACE PREPARATION

 NEWTEC PU; NEWTEC-PUA finishes for flat roofs and terraces can be applied on a wide range of existing surfaces (mortar, cement, traditional waterproof sheeting, ceramics, wood etc), using a few simple steps.

2.PRIMER

First apply a coat of primer resin to ensure maximum adhesion to the surface.[NEWTEC-PRIMER]

3.FINISH LAYER
Finish coat EPOXY POLY GUARD – HBSFLE-FG-8248 is a high performance coating.
 
High abrasion resistance, UV resistance and color fastness