Polyurea coating
NEWTEC PUA products are a series of high-quality waterproof polyurea coatings applied through high-pressure, multi-component, heated reactor coating equipment. Their excellent mechanical properties have made them one of the most widely used coatings for construction work involving demanding specifications.
Stretchable polyurea membrane 100% pure for waterproofing and coating (>600%)
SCM COAT 200 is a 100% pure Polyurea with gelatinization time (19-20 seconds) and excellent elasticity designed for the corrosion protection of concrete substrates. It is an ideal product for construction activities, infrastructure and waterproofing, anti-wear, marine corrosion … Especially with elements with structural movement. Unlike many other fluids, SCM COAT 200 is not damaged in continuous immersion
100% pure polyurea membrane for waterproofing and coating
EPL-550 is a 100% pure Polyurea with sizing time (19-20 seconds) designed for the protection of concrete substrates, Foam coating. The EPL-550 is ideal for construction, infrastructure and waterproofing, abrasion resistance, marine corrosion … Unlike many other fluids, the EPL-550 is not damaged in continuous immersion.
Low viscosity polyurea membrane 100% pure for waterproofing and coating
NT 200 is a 100% pure polyurea with a low viscosity time (19-20 seconds) designed for the corrosion protection of concrete substrates. NT 200 is an ideal product for construction activities, infrastructure and waterproofing, anti-wear, corrosion … in general. NT 200 is not damaged in continuous immersion environment.
High strength polyurea membrane 100% pure for waterproofing and coating
The UA-1001 is a 100% pure high strength polyurea with a gelatinization time (19-20 sec) designed for general protection, especially in special applications where high performance is required. The UA-1001 is ideal for infrastructure and defense operations with its high chemical resistance and excellent mechanical properties.
Cold polyurea membrane for waterproofing and coating
NEWTEC PUA-BRUSH is a polyurea based high-strength plastic coating. Developed for coating application control that can be applied by roller, rake table, brush or airless sprayer. For protection against waterproofing, chemical corrosion for construction works. Where it is difficult to spray Polyurea paint by machine. Surfaces that need manual polyurea application such as expansion joints, cessation joints …
